-The machine can process many things except stones, glass, iron and something like that.

-Each machine model can fully process the garbage in about 4 hours in the condition of 40% ambient humidity. Of course the machine can work 24 hours all the day.

-The working principle of the machine is not burning. There is no fire in the machine; we are making use of the energy of the hydronium to heat the garbage then make it decompounds.  After processed, the ash in the bottom of the machine which you can get is a fertilizer for the field. It can be sold to a farmer.

-It is necessary to put the machine under some canopy or cover to protect the machine from drenched by the rain.

-The Gas Processor (the pipe) will last shorter than the garbage machine.

-THE MACHINE CAN RELEASE ABOUT 5 KG OF ASH WHEN IT FINISHES PROCESSING 1 TON OF DAILY GARBAGE. IT ALSO DEPENDS ON THE KING OF GARBAGE. 

-Basically, you don't need to do any installation for the GARBAGE PROCESSOR but the EXHAUST GAS PROCESSOR.

- Anything you put into the machine that cannot be processed would be release with the ash together at last. These things would never damage the machine.

-The machine can process solid type of waste but not liquid waste.

-All kind of batteries are ok except liquid batteries.

-Fibra de vidrio, asbestos, sales estabilizadas, vermiculita fina, vermiculita media, enviroblend no pueden ser procesados.

-Afirmativamente la horno procesa mercurio, el humo es toxico para la atmosfera. Si se desea  procesar elementos tóxicos como desechos químicos, médicos e industriales, es necesario utilizar EL EXOSTO DE PROCESAMIENTO DE GAS con la maquina todo junto, usado para procesar el humo toxico. Después de procesado, el humo hacia la atmosfera es limpio y seguro. Para basura diaria domestica no es necesario este EXOSTO el cual consume solo un poco de electricidad (consume 12Kw para prender y 50w para mantenerse). Los archivos de prueba se realizaron por compañías autorizadas por el gobierno, significa que es algo confiable. Respecto a las cenizas, ya se han usado en terrenos con resultados satisfactorios.

-The machine is not totally hermetic. When the machine is working, you can open the feeding door any time you want then you can add the garbage. And we suggest you that you’d better keep adding garbage into the machine and keep the machine working all the time (24 hours every day) if you have enough garbage and waste. Because the machine needn’t any stop.

-You won’t feel too hot when you are close to the machine because the temperature of the surface of the machine is just about 35 to 50 centigrade. So you won’t feel hot even if you put the machine in a house.

-You can open the feeding door directly to see the procedure of the machine.  You’d better to keep putting the waste into the machine all the time and do not let the machine stop or the container empty.

-The heat-resistant materials inside the machine needn’t any maintenance.

-The working manpower labour depends on your requirement. As usual, you just need to arrange one or two people to operate the machine and add the garbage.

-All the operation of the machine can be done only by one person and all the valves can be manual switched. The feeding door also can be opened by the worker. There is also available a new automatic equipment for the garbage feeding. If you use the device with the machine together, the speed of the garbage feeding will be faster. And the residues generated in processing can be exhausted both through the front dust exhaust door 8 and the rear dust exhaust door 9.

-It has one year warranty.

-If you use this machine to process the medical or hospital garbage, the ash collected from the machine may contain some element not suitable for the field.

-Processed water steam is exhausted through the steam outlet 2. The carbonized valve 1 can be connected with a normal plastic pipe or metal pipe because the temperature of the released steam is very low. But the normal plastic pipe or metal pipe is not the same as the EXHAUST GAS PROCESSOR. If the garbage contains some chemical element or some poison thing, you'd better use the EXHAUST GAS PROCESSOR.

-About the real cubage of each machine, you can see it from the model number. For example, if the model of the machine is GM1000, the real cubage of the machine is 1 m3.

-There is not any maintenance for the whole set of machines and the EXHAUST GAS PROCESSOR. The machine must be just protected from rain.

-THE EXHAUST GAS PROCESSOR reaches 1100 °C, and the temperature inside the center of the machine is about 700°C. But you won’t feel this high temperature because we have 3 levels filter on the center of the machine.

-The machine can process with the feeding door or lid opened but it is not recommended to open it for too long because it will always release some smoke from the door although the smoke is safe for our body.

-If you put garbage into the machine, you don’t have to make it compacted like a cube.

-We use newspaper to strike the fire. This is necessary for you to use the machine at the first time. The machine needs the heat of the fire to power on and start working. So you have to burn something to start the machine. Of course you can burn not only the newspaper but also any paper or some woods and anything can be burned. But I think if you burn the newspaper is a very cheap method and very convenience. And the position for you to strike the fire is the ash box. So you can see paper is burned and throw it into the ash box. After this procedure, the machine starts working.

-There is not an exactly time to make the temperature reach 700"C, because the process procedure does not depend on the temperature. Even you start the machine it can process the garbage at once. But it will need almost one day to make it stable.

-The two valves shown on the video are used to choose the way you release the exhaust gas. If you switch on the left valve and switch off the right valve, the second burner will be turn off and the exhaust gas will be released directly from the vertical pipe without processed. If you switch off the left valve and switch on the right valve, exhaust will be released from the second burner (the right side pipe), and the gas will be processed before this is released to the air. It is suggested that you should use the second burner if the garbage contain many plastic or rubber (chemical waste).

-The machine can process perfectly all kind of plants and herbs.

- Weights:

GM1000, 5037KGS

GM1500, 5300KGS

GM2000, 5668KGS

GM3000, 6450KGS

GM4000, 7000KGS

-The machine can be turned off any time if you do not need it. Also you can use it all the time and never stop. But if you do not have enough garbage to process, the machine will turn off by itself. If you want to keep it working, you should keep adding the garbage.

Aclaraciones. 

¿Que ingresa en la parte baja para encender?

Se trata de papel periódico. Es necesario para usarla por primera vez. La maquina necesita de fuego para empezar a funcionar. Se puede quemar cualquier cosa.

¿Como esto que ingresa garantiza la temperatura adecuada para la incineración?

 Solo forma parte del mecanismo, se alcanza una temperatura de 700°C en el interior.

¿Los cables que se ven por encima es para algo en especial del horno?

 Se trata de cables para suministrar energía eléctrica (consume 12Kw para prender y 50w para mantenerse) para EL EXOSTO DE PROCESAMIENTO DE GAS.

¿La llave de paso que le instala es para que?

 Es la válvula 6 de control de conversión; se abre o posiciona en estatus abierto y luego se puede usar la maquina.

 ¿En cuanto tiempo llega a la temperatura adecuada?

 There is not an exactly time to make the temperature to reach 700"C, because the process procedure does not depend on the temperature. Even you start the machine it can process the garbage at once. But it will need almost one day to make it stable.

¿Las llaves de salida de los tubos porque se ven independientes?

These two valves are used to choose the way you release the exhaust gas. If you switch on the left valve and switch off the right valve, the second burner will be turn off and the exhaust gas will be released directly from the vertical pipe without processed. If you switch off the left valve and switch on the right valve, exhaust will be released from the second burner (the right side pipe), and the gas will be processed before this is released to the air. It is suggested that you should use the second burner if the garbage contain many plastic or rubber (chemical waste).

¿Se puede apagar todos los días sin problemas?

Of course it can be turned off any time if you do not need it. Also you can use it all the time and never stop. But if you do not have enough garbage to process, the machine will turn off by itself. If you want to keep it working, you should keep adding the garbage.

¿Se entrega instalado y con garantía? se enseña el manejo?, ¿cuanto dura la capacitación?

Se entrega instalada con 1 año de garantía. Por supuesto se enseña su funcionamiento y tardaría poco tiempo debido a que es bastante simple.